試題1

某公司為多個部門劃分了不同的局域網，每個局域網中的主機數量如下表所示，計劃使用地址段192.168.10.0/24劃分子網，以滿足公司每個局域網的IP地址需求，請為各部門選擇最經濟的地址段或子網掩碼長度。

查看答案

試題2

The purpose of the requirements definition phase is to produce a clear, complete, consistent, and testable  （1）  of the technical requirements for the software product.
During the requirements definition phase, the requirements definition team uses an iterative process to expand a broad statement of the system requirements into a complete and detailed specification of each function that the software must perform and each  （2）  that it must meet.The starting point is usually a set of high-level requirements from the  （3）  that describe the project or problem.
In either case, the requirements definition team formulates an overall concept for the system and then defines  （4）  showing how the system will be operated, publishes the system and operations concept document, and conducts a system concept review（SCR）.
Following the SCR, the team derives  （5）  requirements for the system from the high level requirements and the system and operations concept. Using structured or object-oriented analysis, the team specifies the software functions and algorithms needed to satisfy each detailed requirement.
（1）A、function
B、definition
C、specification
D、statement
（2）A、criterion
B、standard
C、model
D、system
（3）A、producer
B、customer
C、programmer
D、analyser
（4）A、rules
B、principles
C、scenarios
D、scenes
（5）A、cotailed
B、outlined
C、total
D、complete

查看答案

試題3

CMM模型將軟件過程的成熟度分為5個等級。在 （ ） 使用定量分析來不斷地改進和管理軟件過程。
A、優化級
B、管理級
C、定義級
D、可重復級

查看答案

試題4

查看答案

試題5

如果要將目標網絡為202.117.112.0/24的分組經102.217.115.1接口發出，需增加一
條靜態路由，正確的命令是（） 。
A.Route add 202.117.112.0 255.255.255.0 102.217.115.1
B. Route add 202.117.112.0 0.0.0.255 102.217.115.1
C.add route 202.117.112.0 255.255.255.0 102.217.115.1
D. add route 202.117.112.0 0.0.0.255 102.217.115.1

查看答案

試題6

查看答案

試題7

查看答案

試題8

下面的地址中，屬于全局廣播地址的是（1）。在下面的網絡中，IP全局廣播分組不能通過的通路是（2）。

查看答案

試題9

查看答案

試題10

Serialization delay and  （1）  delay are the two components of network delay that are improved by increasing bandwidth. Serialization delay, i.e. the amount of time it takes to put the  （2）  on the wire, and queuing delay (depth of the queue) are improved by increasing the  （3）  from a 128kbps circuit to a T1. However, three other components of delay, routing/switching delay, distance delay, and protocol delay are components that can not be positively affected by an  （4）  in bandwidth. If the circuits are not over-utilized, then increasing the bandwidth to improve the  （5）  of the application will only result in an increased bandwidth with no positive effects on performance.
（1）A、buffering
B、queuing
C、receiving
D、timing
（2）A、electricity
B、digital
C、data
D、variable
（3）A、memory
B、cache
C、bandwidth
D、delay
（4）A、increase
B、decrease
C、maintenance
D、extension
（5）A、capability
B、cost
C、amount
D、performance

查看答案