某網絡中,在SW1和SW2上做如下配置,實現的功能包括()。
[SWl]int Eth-Tyunk 10
[SW1-Eth-Trunk10]trunkport GigabitEthernet 0/0/1 to 0/0/2
[SWl-Eth-Trunk10]mode manual load balance
[SW1-Eth-Trunkl0]load-balance src-dst-ip
[SW2]int Eth-Trunk 20
[SW2-Eth-Trunk20]trunkport GigabitEthernet 0/0/1 to 0/0/2
[SW2-Eth-Trunk20lmode manual load balance
[SW2-Eth-Trunk20]load-balance src-dst-ip
A.配置了跨設備鏈路聚合,實現鏈路冗余
B.配置了負載分擔模式,實現兩條鏈路共同承擔流量
C.配置了基于LACP(鏈路聚合控制協議)的鏈路聚合模式
D.兩臺交換機的鏈路聚合組編號不一致,上述配置無法生效